Race Drag Set

PR Stage 5 Drag Kit With 6-Bolt Race Light Flywheel For 96-04 Ford Mustang GT 4.6L


PR Stage 5 Drag Kit With 6-Bolt Race Light Flywheel For 96-04 Ford Mustang GT 4.6L
PR Stage 5 Drag Kit With 6-Bolt Race Light Flywheel For 96-04 Ford Mustang GT 4.6L
PR Stage 5 Drag Kit With 6-Bolt Race Light Flywheel For 96-04 Ford Mustang GT 4.6L
PR Stage 5 Drag Kit With 6-Bolt Race Light Flywheel For 96-04 Ford Mustang GT 4.6L
PR Stage 5 Drag Kit With 6-Bolt Race Light Flywheel For 96-04 Ford Mustang GT 4.6L
PR Stage 5 Drag Kit With 6-Bolt Race Light Flywheel For 96-04 Ford Mustang GT 4.6L
PR Stage 5 Drag Kit With 6-Bolt Race Light Flywheel For 96-04 Ford Mustang GT 4.6L

PR Stage 5 Drag Kit With 6-Bolt Race Light Flywheel For 96-04 Ford Mustang GT 4.6L  PR Stage 5 Drag Kit With 6-Bolt Race Light Flywheel For 96-04 Ford Mustang GT 4.6L

PR Stage 5 Drag Kit W/ 6-Bolt Race Light Flywheel For 96-04 Ford Mustang GT 4.6L. Just contact our support team.

Checkout safely with peace of mind. Platinum Racing Stage 5 Clutch Kit and Chromoly Lightweight Flywheel Set Key Features. 4140 Chromoly Steel Lightweight Flywheel which are CNC machined and dynamically computer balanced to 15,000 RPM. Premium Ductile/ Nodular Cast Iron Pressure Plate which provides maximum strength and the highest wear resistance.

Our Diaphragm springs endure a multi-stage extreme heat-treating process which results in the ultimate durability and quality. Has double clamp load than all our other stages. 6 Puck sprung clutch disc with Sinter-Metallic friction material for ultimate holding power, maximum performance, and extended life. Properly suited for track use, performance street driving and Light daily use. Recommended break-in period: 500 miles.

4140 Chromoly Lightweight Flywheel (16.54 lbs, 6 bolt crank, 164 ring gear). Ultra Clamp Load Performance Pressure Plate (twice as much as our other stages).

Stage 5 MIBA Sinter-Metallic Clutch Disc (11" x 1-1/16" x 10 spline). Japanese Pilot Bearing / Bushing (if applicable). Feel: Improved throttle response, moderate pedal effort with a quick and direct positive engagement.

Life: With our high-quality friction material you will see extended life. Quality: All products are designed, engineered, assembled, tested, and inspected by Platinum Racing to ensure highest quality. Proudly made in the USA. PLATINUM Stage 5 MIBA Sinter-Metallic Sprung Clutches use MIBA friction materials that are the world's first clutch lining worldwide to combine the advantages of sinter-metallic and organic friction materials, allowing you to benefit from the long service life of a sinter-metallic lining without compromising the high shifting comfort of an organic friction lining. Ultra clamp loads give the most capacity to handle low-mild-high modified N/A and forced induction engines.

Drivability is a little more aggressive than all our stages. There is clutch chatter especially when using our lightweight flywheel.

Pedal efforts will be moderately higher because of the dual clamp loads. All of our Stage 5 clutch discs have spring center dampers to reduce drivetrain shock and provide smooth grippy clutch engagement. These clutch covers are designed to achieve double the amount of clamping force that is higher than the genuine part allowing a higher torque transmitting capacity. Ductile material is used for all pressure plates, and high burst strength can be achieved in all temperature ranges.

Our stage 5 clutch cover is the highest load single plate we offer. 6-Puck MIBA Sinter-Metallic Sprung Disc. MIBA has one of the best reputations in the world in multiple industries when it comes to their sinter-metallic friction products and that is why we use nothing but the best materials for your clutch kits. This friction material provides a nice grabby engagement while providing high heat resistance. The engagement is quick when getting off the line.

This type of disc can withstand a considerable amount of heat - they can operate without fading at temperatures up to 1000°F. This heat resistance makes them ideal for motorsports action. It's very important to break in clutches before any type of hard shifting or racing. PLATINUM Lightweight Flywheels combine low weight, low inertia and high thermal capacity.

They are designed for light to moderately tuned racing cars for drag racing, autocross, drift, and rally events, as well as street usage. They are made from solid one-piece billet 4140 chromoly steel or chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance the airflow which improves the cooling of the clutch. The ring gear teeth are integrated onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and has the possibility of separating from the flywheel due to the different expansion coefficients of aluminum and steel.

Newly available are lightweight, solid replacements for vehicles fitted with OE dual mass flywheels. PLATINUM lightweight flywheels have passed engineering tests to 15,000-18,000 RPM. They are guaranteed not to fail to the said RPM, and are all SFI approved. Platinum Racing Stage 5 Clutch Kit and Chromoly Lightweight Flywheel Set Key Features: 4140 Chromoly Steel Lightweight Flywheel which are CNC machined and dynamically computer balanced to 15,000 RPM Premium Ductile/ Nodular Cast Iron Pressure Plate which provides maximum strength and the highest wear resistance. Clutch Cover These clutch covers are designed to achieve double the amount of clamping force that is higher than the genuine part allowing a higher torque transmitting capacity.

6-Puck MIBA Sinter-Metallic Sprung Disc MIBA has one of the best reputations in the world in multiple industries when it comes to their sinter-metallic friction products and that is why we use nothing but the best materials for your clutch kits. PLATINUM Lightweight Flywheel PLATINUM Lightweight Flywheels combine low weight, low inertia and high thermal capacity. 07802 75204 FM3-HDSS SF871 EF503A 186461.

07802 75204 FM3-HDG6 SF871 EF503A 186461. Clutch Kit Flywheel Bundle Set. 11 in (279.4 mm). High Torque 6-Puck Solid Hub. Fits 6 bolt crank, 10 spline.

Platinum Racing is your one stop shop for all your clutch and flywheel needs. We only offer the highest quality kits and premium friction materials all for an unbeatable value.

WHAT OUR CUSTOMERS ARE SAYING ABOUT US. Received sooner that expected A+++.

PLATINUM STAGE 1 CLUTCH & ULTA LITE FLYWHEEL KIT FOR 350Z G35 VQ35DE 3.5L USA. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Transmission & Drivetrain\Clutch Parts & Kits\Clutch Kits". The seller is "top1racing" and is located in this country: US. This item can be shipped worldwide.

  1. Input Spline Quantity: 10
  2. Country/Region of Manufacture: United States
  3. OE/OEM Part Number: 07802 75204 FM3-HDSS SF871 EF503A 186461
  4. Interchange Part Number: 07802 75204 FM3-HDG6 SF871 EF503A 186461
  5. Type: Clutch Kit Flywheel Bundle Set
  6. Disc Diameter: 11 in (279.4 mm)
  7. Transmission Type: Manual
  8. Clutch Disc Style: High Torque 6-Puck Solid Hub
  9. Fitment Type: Direct Replacement
  10. Manufacturer Part Number: PR-5XT-CB-1020
  11. Input Shaft Diameter: 1-1/16\
  12. Disc Material: Ceramic
  13. Flywheel Material: 4140 Chromium Molybdenum steel
  14. Pressure Plate Type: HD Diaphragm Type
  15. Important Note: Fits 6 bolt crank, 10 spline
  16. Brand: Platinum Racing
  17. Manufacturer Warranty: 1 Year
  18. Number of Teeth: 164 ring gear teeth


PR Stage 5 Drag Kit With 6-Bolt Race Light Flywheel For 96-04 Ford Mustang GT 4.6L  PR Stage 5 Drag Kit With 6-Bolt Race Light Flywheel For 96-04 Ford Mustang GT 4.6L